Amplificador Marinizado 3 Canais JL Audio MX600/3

MX600/3

3-Channel Class D System Amplifier, 100 W x 2 + 400 W x 1 @ 2 ? / 75 W x 2 + 250 W x 1 @ 4 ? - 14.4V

Engineered specifically for powersports applications, the 3-channel MX600/3 amplifier employs our high-speed NexD? switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV?s or other utility vehicles.

Generating a solid 75W x 2 into 4 ohms (14.4V, 1% THD), the MX600/3 is the perfect solution for driving a pair of speakers and a subwoofer.

Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

Rated Continuous (RMS) Power @ 14.4 V

Main Channels @ 4 ? 75 W RMS x 2

Main Channels @ 2 ? 100 W RMS x 2

Main Channels - Bridged @ 4? 200 W RMS x 1

Subwoofer Channel @ 4 ? 250 W RMS x 1

Subwoofer Channel @ 3 ? 300 W RMS x 1

Subwoofer Channel @ 2 ? 400 W RMS x 1

Subwoofer Channel @ 1.5 ? N/A

Rated Continuous (RMS) Power @ 12.5 V

Main Channels @ 4 ? 50 W RMS x 2

Main Channels @ 2 ? 80 W RMS x 2

Main Channels - Bridged @ 4? 100 W RMS x 1

Subwoofer Channel @ 4 ? 200 W RMS x 1

Subwoofer Channel @ 3 ? 250 W RMS x 1

Subwoofer Channel @ 2 ? 300 W RMS x 1

Subwoofer Channel @ 1.5 ? N/A

General Specifications

Frequency Response 20 Hz - 20 kHz (+0, -1dB)

S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 ? >92 / 50 Hz

Damping Factor @ 2 ? >43 / 50 Hz

THD+N @ Rated Power (Main Channels) <1% @ 2 ? per Ch.

THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ? per Ch.

Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 580 mV - 14 V RMS (High)

Min.Copper Power / Ground Wire Gauge 4 AWG wire

Fuse Rating 60 A (AFS, AGU or MaxiFuse?)

Signal Processing

Filter Slope(s) 12 dB/octave

Filter Frequency Range: Channels 1 & 2 (front) 35 Hz - 300 Hz

Filter Frequency Range: Subwoofer Channel 40 Hz - 400 Hz

Filter Mode(s): Channels 1 & 2 (front) High-Pass only

Filter Mode(s): Subwoofer Channel Low-Pass only

Detented, Calibrated Filter Freq. Potentiometers Yes

Filter Defeat Function Yes

Remote Subwoofer Level Control Optional (RBC-1)

Remote Level Modes N/A

Channel Input Mode Switch Yes (2/4 ch.)

Pass-Through Preamp Output None

Source Channel Selection for PreOuts N/A

Physical Specifications

Height (H) 1.77 in / 45 mm

Width (W) 9.33 in / 237 mm

Depth (D) 4.50 in / 115 mm