Registre seu e-mail
M400/4
4-Channel Class D Marine Full-Range Amplifier, 100 W x 4 @ 2 ? / 75 W x 4 @ 4 ? - 14.4V
M400/4 Product Spotlight
This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts to each of its four channels into 2 ? (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD? ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
Use the M400/4 in combination with our M600/1 monoblock to build a 1000 W amplification system to power four satellites and a subwoofer... and fit the whole thing under a seat. Or, use the M400/4 by itself to power two satellites, plus a subwoofer. With M-Series amplifier, the possibilities are endless.
The M400/4 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's Ch. 1 & 2 level or overall level can be directly controlled from a remote location.
This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Rated Continuous (RMS) Power @ 14.4 V
@ 4 ? 75 W RMS x 4
@ 2 ? 100 W RMS x 4
Bridged @ 4? 200 W RMS x 2
Rated Continuous (RMS) Power @ 12.5 V
@ 4 ? 60 W RMS x 4
@ 2 ? 90 W RMS x 4
Bridged @ 4? 180 W RMS x 2
General Specifications
Frequency Response 12 Hz - 22 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 ? >150 / 50 Hz
Damping Factor @ 2 ? >75 / 50 Hz
THD+N @ Rated Power <1% @ 2 ? per Ch.
Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 40 A (AFS, AGU or MaxiFuse?)
Signal Processing
Filter Mode(s) Low-Pass or High-Pass
Filter Slope(s) 12 dB/octave
Filter Frequency Range 50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometers Yes
Filter Defeat Function Yes
Remote Level Control Optional (HD-RLC)
Remote Level Modes 2 or All channels
Channel Input Mode Switch Yes (2/4 ch.)
Pass-Through Preamp Output Buffered
Source Channel Selection for PreOuts Yes
Physical Specifications
Height (H) 2.05 in / 52 mm
Width (W) 8.52 in / 216 mm
Depth (D) 7.09 in / 180 mm
Net Weight 4.75 lb / 2.15 kg
Código | X2YLZQ4V7 |
Código de barras | 818209576017 |
Marca | JL Audio |