0
Meu carrinho
Carrinho Vazio

Amplificador Marinizado 5 Canais JL Audio M1000/5v2

Seja o primeiro a opinar :)
(Cód.: KEV9S8T7B)
Data de lançamento: 26/07/2021

Não disponível

Enviar
Avise-me quando estiver disponível
Descrição Geral

M1000/5v2

 

5-Channel Class D Marine System Amplifier, 100 W x 4 @ 2 ? + 600 W x 1 @ 2 ? - 14.4V

 

Here is the perfect, all-in-one solution to drive a potent 4-speaker + dual subwoofer marine audio system. The M1000/5v2 delivers up to 1000 W of clean power and can comfortably drive two pairs of quality component speaker systems with 75 W x 4 @ 4 ?, while also delivering a stout 600 W of power to a dual subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD? switching amplifier design.

 

The M1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. 

 

With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer output level or master volume for all channels can be directly controlled from the helm. The M1000/5v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. 

 

This amplifier features white and gray powder-coat finish, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

 

Rated Continuous (RMS) Power @ 14.4 V

Main Channels @ 4 ? 75 W RMS x 4

Main Channels @ 2 ? 100 W RMS x 4

Main Channels - Bridged @ 4? 200 W RMS x 2

Subwoofer Channel @ 4 ? 400 W RMS x 1

Subwoofer Channel @ 3 ? 500 W RMS x 1

Subwoofer Channel @ 2 ? 600 W RMS x 1

Subwoofer Channel @ 1.5 ? N/A

 

Rated Continuous (RMS) Power @ 12.5 V

Main Channels @ 4 ? 60 W RMS x 4

Main Channels @ 2 ? 90 W RMS x 4

Main Channels - Bridged @ 4? 180 W RMS x 2

Subwoofer Channel @ 4 ? 360 W RMS x 1

Subwoofer Channel @ 3 ? 480 W RMS x 1

Subwoofer Channel @ 2 ? 600 W RMS x 1

Subwoofer Channel @ 1.5 ? N/A

 

General Specifications

Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB)

Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB)

S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 ? >150 / 50 Hz

Damping Factor @ 2 ? >75 / 50 Hz

THD+N @ Rated Power (Main Channels) <1% @ 2 ? per Ch.

THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ? per Ch.

Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)

Min.Copper Power / Ground Wire Gauge 4 AWG wire

Fuse Rating 80 A (AFS, AGU or MaxiFuse?)

 

Signal Processing

Filter Mode(s): Channels 1 & 2 (front) High-Pass only

Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave

Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz

Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass

Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave

Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz

Filter Mode(s): Subwoofer Channel Low-Pass only

Filter Slope(s): Subwoofer Channel 12/24 dB/octave

Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz

Detented, Calibrated Filter Freq. Potentiometers Yes

Filter Defeat Function Yes

Infrasonic Filter: Subwoofer Channel none

Remote Level Control Optional (HD-RLC)

Remote Level Modes Sub Ch. or All Channels

Channel Input Mode Switch Yes (2/4/6 ch.)

Pass-Through Preamp Output None

Source Channel Selection for PreOuts N/A

 

Physical Specifications

Height (H) 2.05 in / 52 mm

Width (W) 14.73 in / 374 mm

Depth (D) 7.09 in / 180 mm

Ficha técnica
Código KEV9S8T7B
Código de barras 795464710168
Marca JL Audio
Avaliações

Deixe seu comentário e sua avaliação







- Máximo de 512 caracteres.

Clique para Avaliar


  • Avaliação:
Enviar
Faça seu login e comente.

Produtos visitados