Amplificador Marinizado Mono JL Audio M600/1

M600/1

Monoblock Class D Marine Subwoofer Amplifier, 600 W x 1 @ 2 ? / 400 W x 1 @ 4 ? - 14.4V

This potent monoblock amplifier employs our high-speed NexD? switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 ? load (14.4V, 1% THD).

Rated Continuous (RMS) Power @ 14.4 V

@ 4 ? 400 W RMS x 1

@ 3 ? 500 W RMS x 1

@ 2 ? 600 W RMS x 1

@ 1.5 ? N/A

Rated Continuous (RMS) Power @ 12.5 V

@ 4 ? 300 W RMS x 1

@ 3 ? 400 W RMS x 1

@ 2 ? 500 W RMS x 1

@ 1.5 ? N/A

General Specifications

Frequency Response 7 Hz - 500 Hz (+0, -1dB)

S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W >59 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 ? >1000 / 50 Hz

Damping Factor @ 2 ? >500 / 50 Hz

THD+N @ Rated Power <1% @ 2 ? per Ch.

Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS

Min.Copper Power / Ground Wire Gauge 4 AWG wire

Fuse Rating 50 A (AFS, AGU or MaxiFuse?)

Signal Processing

Filter Mode(s) Low-Pass only

Filter Slope(s) 12/24 dB/octave

Filter Frequency Range 50 Hz - 500 Hz

Detented, Calibrated Filter Freq. Potentiometer Yes

Filter Defeat Function Yes

Infrasonic Filter 30 Hz, defeatable

Bass Boost EQ (0 to +12 dB @ 45 Hz) No

Output Polarity Switch No

Remote Subwoofer Level Control Optional (HD-RLC)

Pass-Through Preamp Output Buffered

Physical Specifications

Height (H) 2.05 in / 52 mm

Width (W) 8.52 in / 216 mm

Depth (D) 7.09 in / 180 mm

Net Weight 4.6 lb / 2.06 kg