Amplificador Marinizado 5 Canais JL Audio M700/5

M700/5

5-Channel Class D Marine System Amplifier, 75 W x 4 @ 4 ? + 300 W x 1 @ 2 ? - 14.4V

The M700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and it fits comfortably in just about any boat's weather-tight compartments. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 ?), while also delivering a stout 300 W of power to a subwoofer system. The breakthrough that makes this much power possible in such a small chassis is our NexD? switching design.

The M700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's subwoofer channel level or overall level can be directly controlled from a remote location.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Rated Continuous (RMS) Power @ 14.4 V

Main Channels @ 4 ? 75 W RMS x 4

Main Channels @ 2 ? 100 W RMS x 4

Main Channels - Bridged @ 4? 200 W RMS x 2

Subwoofer Channel @ 4 ? 180 W RMS x 1

Subwoofer Channel @ 3 ? 240 W RMS x 1

Subwoofer Channel @ 2 ? 300 W RMS x 1

Subwoofer Channel @ 1.5 ? N/A

Rated Continuous (RMS) Power @ 12.5 V

Main Channels @ 4 ? 60 W RMS x 4

Main Channels @ 2 ? 90 W RMS x 4

Main Channels - Bridged @ 4? 180 W RMS x 2

Subwoofer Channel @ 4 ? 180 W RMS x 1

Subwoofer Channel @ 3 ? 240 W RMS x 1

Subwoofer Channel @ 2 ? 300 W RMS x 1

Subwoofer Channel @ 1.5 ? N/A

General Specifications

Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB)

Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB)

S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)

Damping Factor @ 4 ? >150 / 50 Hz

Damping Factor @ 2 ? >75 / 50 Hz

THD+N @ Rated Power (Main Channels) <1% @ 2 ? per Ch.

THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ? per Ch.

Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS

Min.Copper Power / Ground Wire Gauge 4 AWG wire

Fuse Rating 60 A (AFS, AGU or MaxiFuse?)

Signal Processing

Filter Mode(s): Channels 1 & 2 (front) High-Pass only

Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave

Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz

Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass

Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave

Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz

Filter Mode(s): Subwoofer Channel Low-Pass only

Filter Slope(s): Subwoofer Channel 12/24 dB/octave

Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz

Detented, Calibrated Filter Freq. Potentiometers Yes

Filter Defeat Function Yes

Infrasonic Filter: Subwoofer Channel none

Remote Level Control Optional (HD-RLC)

Remote Level Modes Sub Ch. or All Channels

Channel Input Mode Switch Yes (2/4/6 ch.)

Pass-Through Preamp Output None

Source Channel Selection for PreOuts N/A

Physical Specifications

Height (H) 2.05 in / 52 mm

Width (W) 10.23 in / 260 mm

Depth (D) 7.09 in / 180 mm

Net Weight 6.15 lb / 2.79 kg